SIM card sizes, and how to put a SIM in your phone
Updated 16 November 2026 · 3 minute read
The short answer
Almost every phone from the last ten years takes a nano SIM. New SIMs come triple-cut: press out the smallest piece for a nano slot. Turn the phone off, open the tray with the ejector pin, line the cut corner up with the tray, and slide it back in.
The three sizes
- Standard (mini) SIM: 25 × 15 mm. Older phones and some devices like car trackers.
- Micro SIM: 15 × 12 mm. Phones from around 2010 to 2013.
- Nano SIM: 12.3 × 8.8 mm. Almost every current phone.
- eSIM: no card at all. The SIM is built into the phone and the plan is downloaded.
Fitting the SIM
- Turn the phone off.
- Find the tray on the side of the phone and push the ejector pin, or a straightened paper clip, into the small hole beside it.
- Press the right size out of the card carefully, pushing from the back rather than tearing.
- Lay the SIM in the tray gold side down, with the cut corner matching the tray's corner.
- Slide the tray back until it clicks flush, then turn the phone on.
Common problems
- No SIM detected: take it out, check it sits flat and the right way round, and try again.
- SIM locked or asking for a PIN: the PIN is on the card or in the email with your SIM. Three wrong attempts ask for a PUK code, which your provider gives you.
- Do not cut a SIM down with scissors or use adapters that are loose; both can jam the tray.
This guide describes UK rules in general and is not legal advice. Rules change; the date above is when we last checked it against Ofcom's published guidance.